Description

Be seen better in daylight conditions whilst giving your car a fresh and modernised update with these super xenon white 6000-6700k Daytime Running Lights. These lights adopt advanced constant-current controlling technology and are E-mark-4 approved, with no pollution, no noises and no electronic interferer.

These lights have been designed so they're bright enough to be seen in the day by using its 5 super powerful bright SMD LED bulbs but to not cause 'glare' to oncoming traffic.

These also feature a function which turns the light off when you indicate.

Kit Contents:

• Two LED lamps (5 super bright LED SMD bulbs in each)
• 2 Mounting brackets
• Mounting screws
• Wiring
• Manual / wiring diagram
• Gift box

Specification

• Electronic circuit board
• Viewfinder
• Wiring
• Lamp hull and housing
• Electronic circuit board
• High-power LEDs and Controlling gear

Major Technology Parameters:

• Rated Working voltage: DC 12V
• Rated Working current: DC 1.12A
• Rated Power consumption:13.44W
• Limb darkening current: DC 0.66A
• Limb darkening Power consumption: 7.92W

Maximum Technology Parameters:

• Maximum working voltage: DC 24V, 1 minute only;
• Over working voltage: DC 18V, 1 hour only;
• Continuously working time >24hours: maximum current range<+-2mA
• Maximum surface temperature:<60.C (Extra ventricular temperature:20.C)

LED Bulb Technical Parameters:

• Bulb Colour temperature range: 6,000K-6,700K (super crisp bright white)
• Power: 1W (each LED bulb)
• Rated working current:<300 mA
• Current stability<+-2mA (in 24 hours)
• Brightness is between 70 to 90 LM

Electronic Protection:

High-Voltage Protection
The control system will stop working automatically to protect the control module from damage when the power voltage is higher than 15.5V.

Low-Voltage Protection:

The LED light will shut off to protect the system once the voltage is lower than 9v

Lose-Frequency Protection:
The LED light shut off once the control frequency is abnormal to protect the control module and LED light.

Wrong-Connection Protection:
It is not harmful to connect the circuit when the three cables for the light are connected incorrectly. The LED light is off when connection is wrong, and will of course only turn on when the connection is right. The three cables of the light are VBB, Vss and VC respectively.